|
|
|
|
Special
Application Assemblies
Engineered Flexible Products, Inc. has the proven
capability of fabricating intricate and highly sophisticated assemblies
to satisfy the needs of our distributor network. A sampling of these quality
assured assemblies are as follows:
Jacketed Assembly |
Jacketed assemblies are normally used in one of the
following applications:
- As a heated transfer line for those products, such as sulphur,
which must be maintained at an elevated temperature in order to
flow readily. Steam or hot oil is circulated through the jacket,
which in turn heats the product being conveyed in the core hose.
- As a cryogenic transfer line. Maintaining a high vacuum in the
jacket effectively insulates cryogenic liquids being conveyed in
the core hose.
|
| |
|
Traced Assembly |
Traced hose assemblies are used when the product being
conveyed must be heated in order to flow freely. Steam or hot oil
circulated through the inner tracer hose heats the product to maintain
high flow rates.
|
| |
|
Lined Assembly |
Lined hose assemblies are used when the velocity of
the conveyed product exceeds the speed at which damaging resonant
vibration can initiate in an unlined corrugated metal hose.
|
| |
|
Guarded Assembly |
Guarded assemblies are used where a corrugated metal
hose could easily be damaged by rough handling, abrasion, or flexing
past its minimum bend radius.
*drawings compliments of Hosemaster, Inc.
|
|
|
|
|
|
|
|
|
